RCBS X-Die Full Length Sizer Die Small Base Information
The X-Sizer Die features a specially designed mandrel that eliminates the need for repeated trimming after an initial trim of .020″ off the maximum case length. The mandrel contacts the case mouth during sizing and reduces the growth rate. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, then stabilize below the maximum case length with no discernable loss of accuracy or case life. Shellholder sold separately.
Notes:
- Required for reloading ammunition to be used in automatic, semi-automatic, pump, slide and some lever action rifles
- Sizes the body of cases somewhat smaller in diameter than does a standard die
- Sets the shoulder back slightly more than a full length sizer die to ensure proper functioning in the rifles mentioned above
Made In United States of America
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to – www.P65Warnings.ca.gov.
Specifications
Cartridge | 30-06 Springfield |
Extra Features | Spare decapping pin |
Number of Dies | 1 |
Die Type | Full Length Sizer |
Threads | 7/8″-14 |
ShellHolder Included | No |
Storage Box Included | Yes |
Country of Origin | United States of America |
Delivery Information
Shipping Weight | 0.800 Pounds |
Reviews
There are no reviews yet