PTG Receiver Blueprinting Reamer 1-1/16″+.010″ Oversize Piloted Remington 700, Howa & Sako Inch Conversion Information
The Oversized PTG Blueprinting Reamer and Tap (sold separately) are used with precision ground pilot bushings in a bolt action receiver to ensure concentricity with the bolt raceway. The reamer cuts the minor diameter of the threads and the locking lugs and the tap will cut the threads to 1.075″-16TPI. Because the threads are oversized, a factory barrel will not fit and new barrel threads must be cut to match. These tools can be also used to convert many metric actions, including Howa and Sako, to an inch-thread. Converting to an inch-thread allows these fine actions to be rebarreled using most lathes.
Specifications
Minimum Measurements |
1.075 Inches |
Delivery Information
Shipping Weight |
0.850 Pounds |
Related