RCBS Trim and Form Die 308 Winchester from 30-06 Springfield Information
The RCBS Trim Die doubles as a visual case length gauge. Run a case into the trim die and if the case sticks out above the top of the die, it’s too long. File the case down until it is flush with the top of the die and then debur. Headspace is held to minimum tolerances to avoid changing the length of the case. The Trim Die is case hardened and hand polished. Heat treated to withstand a file bearing against the top surface without damage to the die. Cases with an overall length of 1.700″ and shorter require the use of an Extended Shellholder. Shellholder sold separately.
Notes:
- The trim die doubles as a visual case length gauge. Run a case into the trim die and if the case sticks out above the top of the die, it’s too long. File the case down until it is flush with the top of the die. After this process, deburr.
- Cases with an overall length of 1.700″ and shorter require the use of an Extended Shellholder (not included).
- This die also functions as a form die for making 308 Winchester from 30-06 Springfield brass.
Made In United States of America
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to – www.P65Warnings.ca.gov.
Specifications
Cartridge | 308 Winchester |
Number of Dies | 1 |
Threads | 7/8″-14 |
ShellHolder Included | No |
Storage Box Included | Yes |
Country of Origin | United States of America |
Delivery Information
Shipping Weight | 0.570 Pounds |
Reviews
There are no reviews yet